Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4 Product description
Tab. 1
Pos. Name
Y
Z
AA
AB
AC
The LEDs on the control panel have the following meanings:
Fig. 8
A Warning LED
B LED for temperature
C LED for amperes
D LED for wire feed speed
E LED for time
F LED for pulse frequency
G LED for volts
H LED for arc length and/or voltage correction
A
O
EN - 14
Control elements
<Save> button
<Enter> button
<Warning/temperature> LED
USB port
Input for service
LED overview
B
A
m/min
sec
Hz
IS
N
®
iROB
501, iROB
Function
Saves the set parameters in the job memory.
7.6 Managing the job memory on page EN-47
Performs the administrative functions such as button lock,
password, and assignment of welding parameters to memory
locations.
If the button is pressed for 3 seconds or more, button lock is
activated.
The LED illuminates or blinks as soon as an error occurs or if the
device overheats.
10 Faults and troubleshooting on page EN-54
Data can be read from or stored to a USB memory via the port.
The interface is used exclusively for service purposes.
I LED ratio of upper/lower value of wire feed speed
iArc
mX Move DC
J Job No. LED
K LED for gas post-flows (shielding gas)
L LED for end crater filling parameter
M LED for main welding parameter
N LED for start welding parameter
O LED for gas pre-flows (shielding gas)
C
D
E
F
IE
M
L
®
®
401, iROB
301
for
G
V
H
±
I
%
J
Job-No.
K
Werbung
Inhaltsverzeichnis
Fehlerbehebung
