Inhaltsverzeichnis
Werbung
1
COOLANT REPLACEMENT
CAUTION:
Take care so that coolant does not splash
on painted surfaces. If it splashes, wash it
away with water.
1. Place a container under the engine.
2. Remove:
Seat
Refer to "SEAT FUEL TANK AND SIDE
COVERS" section in the CHAPTER 4.
3. Disconnect:
Coolant reservoir hose 1
Drain the coolant completely.
4. Connect:
Coolant reservoir hose
5. Remove:
Engine guard 1
Coolant drain bolt 2
6. Remove:
Radiator cap
Drain the coolant completely.
7. Clean:
Cooling system
Thoroughly flush the cooling system
with clean tap water.
8. Install:
Copper washer
Coolant drain bolt
Engine guard
9. Fill:
Radiator
Engine
To specified level.
Recommended coolant:
Coolant 1 and water
(soft water) 2 mixing ratio:
Coolant capacity:
3 - 6
INSP
ADJ
New
10 Nm (1.0 m · kg, 7.2 ft · lb)
High quality ethylene glycol
anti-freeze containing
anti-corrosion for
aluminum engine
50%/50%
1.2 L (1.06 Imp qt, 1.27 US qt)
Werbung
Inhaltsverzeichnis
