Herunterladen Inhalt Inhalt Diese Seite drucken

Coolant Replacement - Yamaha WR426F 2001 Fahrer- Und Wartungshandbuch

Vorschau ausblenden Andere Handbücher für WR426F 2001:
Inhaltsverzeichnis

Werbung

1

COOLANT REPLACEMENT

CAUTION:
Take care so that coolant does not splash
on painted surfaces. If it splashes, wash it
away with water.
1. Place a container under the engine.
2. Remove:
Seat
Refer to "SEAT FUEL TANK AND SIDE
COVERS" section in the CHAPTER 4.
3. Disconnect:
Coolant reservoir hose 1
Drain the coolant completely.
4. Connect:
Coolant reservoir hose
5. Remove:
Engine guard 1
Coolant drain bolt 2
6. Remove:
Radiator cap
Drain the coolant completely.
7. Clean:
Cooling system
Thoroughly flush the cooling system
with clean tap water.
8. Install:
Copper washer
Coolant drain bolt
Engine guard
Bolt [engine guard (front)]
Bolt [engine guard (rear)]
3 - 6
INSP
ADJ
New
10 Nm (1.0 m · kg, 7.2 ft · lb)
34 Nm (3.4 m · kg, 24 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Wr426fn 2001Wr400f 2001Wr400fn 2001

Inhaltsverzeichnis