Inhaltsverzeichnis
Werbung
SETTING
Jet needle adjustment
The jet needle is adjusted by changing it.
Standard jet needle
* Except for USA
The tapered sections of all jet needles have
the same starting positions, but the needles
are available with different taper angles and
straight-portion diameters.
<Example>
OBDRS - 3
Clip position
Diameter a of straight portion
Taper angle b
Effects of changing the jet needle (refer-
ence)
(Diameter of the straight portion)
Changing the diameter of the straight portion
adjusts the air-fuel mixture when the throttle is
1/8 to 1/4 open.
A
1/4
Å Idle
ı Fully open
(Taper)
A smaller taper affects the richness of the air-
fuel mixture when the throttle is fully open. To
change the air-fuel mixture only at 1/2 throttle,
also adjust the main jet.
1/4
A
Å Idle
ı Fully open
7 - 6
T U N
OBDRS
*OBDRQ
1/2
3/4
T
R
1/2
3/4
C
E
B
+10%
S
–10%
B
+5%
D
–5%
Werbung
Inhaltsverzeichnis
