Inhaltsverzeichnis
Werbung
CAMSHAFTS
19. Install:
Carburetor breather hose 1
Refer to "CABLE ROUTING DIA-
GRAM" section in the CHAPTER 2.
NOTE:
Install the breather hose to the carburetor so
that the hose does not bend near where it is
installed.
EC465360
Carburetor installation
1. Install:
Carburetor joint 1
NOTE:
Install the projection a on the cylinder
between the carburetor joint slots b.
2. Install:
Carburetor 1
NOTE:
Install the projection between the carburetor
joint slots.
3. Tighten:
Screw (air cleaner joint) 1
Screw (carburetor joint) 2
4. Install:
Throttle cable 1
5. Adjust:
Throttle grip free play
Refer to "THROTTLE CABLE ADJUST-
MENT" section in the CHAPTER 3.
4 - 18
ENG
Werbung
Inhaltsverzeichnis
