Inhaltsverzeichnis
Werbung
FRONT WHEEL AND REAR WHEEL
5 - 9
7. Install:
Chain puller 1
Wheel axle 2
NOTE:
Install the chain puller (left), and insert the
wheel axle from left side.
Apply the lithium soap base grease on the
wheel axle.
8. Install:
Chain puller 1
Plain washer 2
Nut (wheel axle) 3
NOTE:
Temporarily tighten the nut (wheel axle) at this
point.
9. Adjust:
Drive chain slack a
Drive chain slack:
40 ~ 50 mm (1.6 ~ 2.0 in)
Refer
to
"DRIVE
ADJUSTMENT" section in the CHAP-
TER 3.
10. Tighten:
Nut (wheel axle) 1
125 Nm (12.5 m · kg, 90 ft · lb)
Locknut 2
CHAS
CHAIN
SLACK
Werbung
Inhaltsverzeichnis
