Setting The Dual Rate Controls - Reely Wild Hawk 3.0 Bedienungsanleitung

g) Setting the dual rate controls
Besides switching the running direction, the remote con-
trol enables to customise the rudder deflection.
The assignment of the four controls is identical to the re-
verse switches.
1 = aileron
2 = elevator
3 = motor function
4 = rudder
For adjustment, use a small plastic screwdriver (see Fig-
ure 28, no. 5), which is attached to the remote control han-
dle and is therefore always at hand.
Turning the controls all the way to the right yields the
greatest deflection of the rudder flaps and the model re-
sponds very sharply to the transmitter control commands.
Turning the controls to the left reduces deflections and the model responds less vigorously to the transmitter control
commands.
Important!
When pushing the motor function joystick all the way up, the motor function control must always be set to
the extreme right position to achieve the maximum motor power.
Make sure you proceed sensitively when making adjustments.
70
Figure 25