Trimming The Controls - Reely Wild Hawk 3.0 Bedienungsanleitung

d) Trimming the controls
You will be able neatly to trim your model once you have got a feel for it. Trimming can be used to correct the flight
direction of your model should it tend to constantly fly in one direction in straight flight without the transmitter joysticks
being manipulated.
Aileron trim:
If the model tends to roll around the longitudinal axis to the right, whereby the left wing tip is raised and the right wing
tip is lowered, repeatedly press the trim button for the ailerons (see also Figure 13, no. 4) to the left (see white arrows
in Figure 32). Continue pressing the button until the model no longer tends to roll. If the model tends to roll to the left,
the trim correction to the right should be used (see dark arrows in Figure 32).
Rudder trim:
If the model tends to deflect to the right, repeatedly press the trim button for the rudder (see also Figure 13, no. 9) to
the left (see white arrows in Figure 33). Continue pressing the button until the model no longer tends to fly to the right.
If the model tends to fly to the left, perform the correction by pressing the trim button to the right (see dark arrows in
Figure 33).
78
Figure 32
Figure 33