Reely Wild Hawk 3.0 Bedienungsanleitung Seite 68

Rudder control
When pushing the motor speed and rudder joystick to the left, the rudder should deflect to the left (see light arrows in
Figure 21). This pushes the rear of the model to the right, causing the model to make a left turn.
When pushing the motor speed and rudder joystick to the right, the rudder should deflect to the right (see dark arrows
in Figure 21). This pushes the rear of the model to the left, causing the model to make a right turn.
Motor control
When pushing the motor speed and rudder joystick up, the motor should start and speed up depending on the position
of the joystick. The motor should turn clockwise when viewed from the rear. You can safely test the motor function due
to the missing propeller. Do not touch the running motor with your hand!
Pushing the joystick all the way up sets the maximum motor power. As you push the joystick down again, the motor
should slow down and come to a complete stop in the lowest joystick position (see Figure 22).
68
Figure 21
Figure 22