Entering The Speed; Switching The Working Light On Or Off; Switching The Photo Illumination On Or Off; Switching The Cooling On Or Off - Sartorius Stedim Biotech CERTOMAT Tplus Bedienungsanleitung

5.2.2 Entering the Speed

• Press the "SHAKER" key.
The input menu of the speed controller appears.
Fig. 22: "Controller SHAKER" menu
• Enter speed (50 rpm) via the screen keypad, set the
"Mode" to "auto" and confirm with "ok"
The shaking operation starts.
The "SHAKER" key shows the
green underline for operating
mode "auto" and the entered
speed (50 rpm) is displayed.

5.2.3 Switching the Working Light on or off

•
Press the "LIGHT" key.
The input menu for the working light appears.
Fig. 23: Entry LIGHT "On"/ "Off"
• Switch off working light by pressing "Off".
The working light is switched
off.
The "LIGHT" key indicates the
grey underline for operating
mode "Off".
All manuals and user guides at all-guides.com
.

5.2.4 Switching the Photo Illumination on or off

• Press the "ILLUM" key.
The input menu for the photo illumination (ILLUM)
appears.
Fig. 24: Entry for ILLUM "On"/ "Off"
• Switch on photo illumination by pressing "On"
The photo illumination is
switched on.
The "ILLUM" key shows the
green underline for operating
mode "On".

5.2.5 Switching the Cooling on or off

• Press the "COOL" key.
The input menu for the cooling appears.
Fig. 25: COOL input "On"/ "Off"
•
Switch off cooling by pressing "Off".
The cooling is switched off.
The "COOL" key shows the grey
underline for operating mode
"Off".
View of the "Main" Menu during the Running
Process.
23