Main" Function; Functional Elements Of The "Main" Menu; Starting An Incubation From The "Main" Menu; Entering The Temperature - Sartorius Stedim Biotech CERTOMAT Tplus Bedienungsanleitung

5

"Main" Function

Fast access to all controllers (TEMP, SHAKER) and
switches (LIGHT, ILLUM, COOL) is obtained via the
"Main" function key in the footer. After pressing the
key an overview menu appears first.
Then open the controller operating images (TEMP,
SHAKER) and the switches (LIGHT, ILLUM, COOL) by
pressing the functional element.
Fig. 20: "Main" menu of the CERTOMAT® Tplus
5.1

Functional Elements of the "Main" Menu

Key, Symbol Meaning, Use
• Measured temperature value
− Input of the temperature set
− Operating mode selection for
− Continue with the controller
• Shaker speed [rpm]
− Input of the set value for the
− Operating mode selection for
− Continue with the SHAKER
• Working light
− Manual operation only
• Photo illumination ON / OFF
− Can be switched manually
− Can be switched by program
• Cooling ON / OFF
− Can be switched manually
− Can be switched by program
22
All manuals and user guides at all-guides.com
in the CERTOMAT® Tplus
value
TEMP controller
menu
shaker speed
SHAKER controller
controller menu
ON / OFF
control
control
5.2

Starting an Incubation from the "Main" Menu

In order to start an incubation from the "Main" menu,
proceed as follows.
Beispiel:
• The following operating values are specified:
− Temperature:
− Speed:
− Working light:
− Photo illumination:
− Cooling:

5.2.1 Entering the Temperature

• Press the "TEMP" key.
The input menu of the temperature controller appears.
Fig. 21: "Controller TEMP" menu
•
Enter the temperature (37 °C) via the screen keypad,
set the "Mode" to "auto" and confirm with "ok".
The heating mode starts.
The "TEMP" key shows the green
underline for operating mode
"auto" and the entered
temperature (37 °C) is displayed
37 °C
50 rpm.
OFF
ON
OFF