Abbreviations; Process Values; Digital Inputs; Digital Outputs - Sartorius Stedim Biotech CERTOMAT Tplus Bedienungsanleitung

10.5

Abbreviations

All designations of the functional elements in the
operating menus depend on the configuration of the
DCU system. Standard configurations use the
following designations:

10.5.1 Process Values

Abbreviation Meaning
(TAG)
TEMP Temperature on the sensor of the
heating
SHAKER Shaking speed (speed of the
shaker for CERTOMAT® systems)

10.5.2 Digital Inputs

Abbreviation Meaning (and measure if
(TAG) necessary)
TEMPC Warning message, check required
of the Pt 1000 in the air stream
HEATC Alarm signal, short circuit of the
heating
SHAKERC Alarm signal, short circuit of the
shaker drive
FUSEC Alarm signal, safety fuse
actuated/replace fuse
DCUON Status signal from DCU main
switch - DCU switched on
SUPON Status signal from basic device -
basic device switched on
44
All manuals and user guides at all-guides.com

10.5.3 Digital Outputs

Abbreviation Meaning (and measure if
(TAG) necessary)
HEAT Status signal of the heating,
"Heating" in operation
TMPON Heating switched on
SHAON Shaker switched on