Equipment, Mounting And Loading Of A Tray; Equipping The Tray - Sartorius Stedim Biotech CERTOMAT Tplus Bedienungsanleitung

2.4

Equipment, Mounting and Loading of a Tray

Sartorius Stedim Biotech GmbH offers trays for the
CERTOMAT® Tplus fixed with sets of universal clamps
for Erlenmeyer flasks of different sizes, or trays
without assemblies. On delivery or after the first set-
up of the CERTOMAT® Tplus the tray can be
premounted ready for operation. If this includes all
clamps and mountings required for first use, you can
insert the containers and start operation, as shown in
chapter 3.2 Equipment, Mounting and Loading of a
Tray. If you need to change the tray or its equipment
for your application or if you want to insert another
tray heed the following information.

2.4.1 Equipping the Tray

•
We recommend to mount all clamps and mounting
sets for your containers on the tray before you place
the tray in the Tplus. So they can be handled easier.
However, the flasks, bottles, etc. with the media
(especially heavy containers) should be placed on the
tray after it has been attached to the tray support.
• Take care of the dimensions of the incubation
chamber, about 890 x 495 x 650 mm (W x H x D)
Mind the weight of the fully equipped tray. It may be
very heavy. The shaking containers may hinder the
handling. You might jolt with the tray and damage the
containers placed on the tray. Media may be released
unintentionally and may cause personnel hazards.
1. For a universal tray without clamps, etc., place and
screw tight the holders and mountings required. In
order to change an existing tray setup, first release all
parts which are not needed.
•
Clamps for Erlenmeyer flasks are available in different
sizes which can be individually combined. For test
tubes, bottles, beakers or separation funnels,
mounting systems, such as test tube racks or universal
mounting sets, are available. Detailed information
about available container holders and mounting
systems you will find in section 12.2.3
2. When assembling clamps and other devices on the
tray, make sure to distribute them evenly. This will
avoid uneven loads and ensure that the containers
can be safely fixed on the tray / in the clamps.
10
All manuals and user guides at all-guides.com