Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
14
Start-up
5.3
Installation
®
The BioWelder
TC is portable and can be used in any location . Use a secure and
horizontal base for the installation . Make sure to place the machine in a way that
the access to the on/off switch and the emergency off button is well accessible!
Connect the power cord with safety earthing to the device socket and switch it on .
The power supply must be according to the technical data . After a brief start-up
section the device is ready to operate .
The raiser is responsible for the safety of the system and its integration.
5.4
Login
The device is set upon delivery so that a user with the name "Supervisor" from
the "Supervisor" user group or the name "Example" from the "Operator" user group
can login without a password . In this case, the instructions needed to execute
initialisation are displayed on the touch screen .
An automatic login can be activated . See Chapter 6 .2 .9 User management
5.5
Maintenance
There is no spare part list for BioWelder
recommends to have a yearly intervention and maintenance executed by your local
Sartorius Service representative that includes temperature sensor validation . Please
contact your local Service representative from Sartorius to establish a maintenance
contract .
This information has to be confirmed with the OK button on the screen . Contact your
Sartorius Stedim Biotech Service Representative, if maintenance is needed .
5.6
Entering settings
Different settings such as the following can be entered from a Supervisor of the
"Supervisor" user group via the menu: language, date, time and type of tube .
Read the corresponding Chapter 6.2 Touch screen
5.7
Initializing axes
After the device starts up, an initialisation must be executed . Follow the instructions
on the touch screen .
The tube holder and the blade are removed from the device.
The user then closes the cover.
®
TC available for the customer . Sartorius
Werbung
Kapitel
Inhaltsverzeichnis
