Sartorius Stedim Biotech CERTOMAT Tplus Bedienungsanleitung Seite 106

Step
Define step 1
Enter operating time of
step 1
Enter operating time
[hh:mm] via screen keypad.
Input of the duration is basically made in hours and minutes [hh:mm]. After input, operating times greater than 24 h are
automatically converted into days, hours and minutes.
The remaining values (speed, temperature, cooling and photo illumination) for the programming of step 1 must be entered in
the same way as the programming of the pre-step.
Define steps 2, 3 and 4
The values for the programming of steps 2, 3 and 4 must be entered in the same way as the programming of the pre-step or
step 1.
If steps 2, 3 and 4 are not required, the operating time of the respective step must be set to "0".
Leave "Batch Parameters"
menu.
32
All manuals and user guides at all-guides.com
Key, Symbol, Display Input
Press "Value" key in "Step 1" line / "Duration"
column.
Enter operating time [hh:mm] via screen keypad
and confirm with "ok" key.
Press "Close" key.