Working Area; Footer - Sartorius Stedim Biotech CERTOMAT Tplus Bedienungsanleitung

4.1.2 Working Area

The "working area" shows the functional elements and submenus of the active main function:
− Preselected process values with their current measured value or set value
− Controllers, e.g. for shaking unit, etc., with current set values
− The current actual values and actual states are displayed in the "main" screen.
Fig. 18: Example: Working area - "Main" screen
• The DCU system is operated directly on the display by selecting a main function and its associated submenus. The functional
elements in the working range and the main function keys in the footer contain "touch keys". Touching them activates
associated submenus, e.g. for the input of data and set values or the selection of operating modes.
• Available functions, "tag" names, parameters and submenus depend on the configuration of the DCU system.

4.1.3 Footer

The footer contains the "main function keys" for switching between the "main functions":
Selection of "Main" via the main function key
Fig. 19: Example: Footer - "Main" screen
• Selection of "Main" via the main function key
All manuals and user guides at all-guides.com
Display form:
− Selected main function:
Key is light grey, pressed down
− Non selected functions:
Keys are dark grey, raised
19