Section 2: Specifications; Instrument; Electrical - Medtronic ACT Plus Benutzerhandbuch

ACT_CH.fm 6/23/04 1:23 pm
UC200304151c ML
5.5" x 7.75" (139.7 mm x 196.85 mm)

Section 2: Specifications

Instrument

Number of Channels:
Timing Range (Seconds):
Actuator Heat Block Temperature:
Range:
Resolution:
Accuracy:

Electrical

Note: Technical data, features, and options referenced in this manual are based on
the latest information available at the time of printing. Medtronic reserves the right
to change specifications without notice.
Electrical Classification:
Power:
Voltage:
Frequency:
Maximum current:
Fuse:
Power cord:
Length:
Type:
Physical Dimensions:
Depth:
Width:
Height:
Weight:
Environmental:
Operating temperature:
Storage temperature:
Operating humidity:
Storage humidity:
Data Ports:
Serial data port:
USB port:
Bar code scanner port:
Floppy drive:
10 English
86702-001 Rev 1.0
2
6 - 999
37.0°C ± 2°C
0.1°C
± 0.5°C
Class 1 equipment
100 - 240 V~ Single phase
50 - 60 Hz
1.0 A (100 - 240)
T2A 250 V
Two wires plus a ground (earth) connector
3.1 m (10 ft.)
3-prong hospital grade (USA only)
33 cm (13.0 in)
20 cm (8.0 in)
27 cm (11.0 in)
5.22 kg (11.5 lb)
14°C to 32°C (57°F to 90°F)
0°C to 49°C (32°F to 120°F)
10% to 90%, noncondensing
5% to 90%, noncondensing
19200 baud, 8 data bits, 1 stop bit, no parity
For future expansion, not supported at this time.
USB Devices must meet the Safety Standards
(IEC 60601-1-1).
Used with the optional symbol LS 1902T Bar
Code Scanner.
PC compatible, 1-44 MB, 3.5-inch floppy disk.
ACT Plus™ Operator's Manual
Medtronic Confidential
CS010