Section 10: Service And Troubleshooting; Service; Instrument Return; Troubleshooting - Medtronic ACT Plus Benutzerhandbuch

ACT_CH.fm 6/23/04 1:23 pm
UC200304151c ML
5.5" x 7.75" (139.7 mm x 196.85 mm)

Section 10: Service and Troubleshooting

Service

Annual preventive maintenance is recommended for your ACT Plus™ system to
ensure accurate performance and reliability. A qualified Medtronic Service
Representative should perform all maintenance or service. The inspection and
maintenance may be performed at your site or at the factory.
Training for Medtronic products is available to qualified hospital personnel upon
request.
More detailed information, such as circuit diagrams, component parts lists, and
calibration instructions, is available for appropriately qualified technical personnel.
Do not attempt to service the ACT Plus™ instrument during the warranty
period, as any manufacturer's warranty will be voided.
WARNING: Do not adjust, modify, repair, or touch the internal circuitry. These
actions could injure the operator or cause faulty operation of the ACT Plus™
instrument.
For information related to test procedures, quality control, and regulatory
information, contact your Medtronic Sales Representative.
Refer all repair requests to:
Medtronic Instrument Service Representative
United States: Medtronic Cardiac Surgery Perfusion Systems
Refer to the back cover for contact information.

Instrument Return

To return an ACT Plus™ instrument for service, contact your Medtronic Service
Representative. Original shipping materials should be used to return the ACT
Plus™ instrument; it should be enclosed within the foam inserts and placed in the
box. The actuator heat block should be in the closed position when it is shipped. If
the original box is no longer available, notify Medtronic Instrument Service or an
authorized representative to obtain shipping materials.

Troubleshooting

The ACT Plus™ instrument self-diagnoses many error and precautionary
conditions, which are displayed on the LCD screen.

Message Types

The ACT Plus™ instrument provides three types of messages to indicate its
operating conditions: Information/Status; Alerts; and System Alarms. These
messages, with the exception of System Alarms, appear in the screen's Status
Message area.
44 English
86702-001 Rev 1.0
Medtronic Confidential
ACT Plus™ Operator's Manual
CS010