Technical Specifications - Medtronic One-Press-Serter Bedienungsanleitung

• Avoid areas subjected to vigorous movement during exercise
For a diagram of recommended sensor insertion areas, see the sensor user guide.
Inserting the sensor
For instructions on how to insert the sensor, see the sensor user guide.
Maintenance
Cleaning
Clean the serter after every use or whenever debris, blood, or other contaminants are visible.
To clean the serter:
Note: Press and release the mechanism on the underside of the serter to fully rinse the device.
1. Rinse the serter under running tap water.
2. Submerge the serter in a solution of mild soap and warm water.
3. Use a soft-bristled brush to clean the serter until it is free of visible dirt.
4. Rinse the serter under running tap water until all visible soap is gone. Make sure to fully rinse all hard-to-
reach areas.
5. Shake off any excess water. Place the serter upright on a clean cloth to air dry.
Storage
Store the serter in the released position at room temperature.
Disposal
Dispose of the serter according to local regulations.

Technical specifications

Approximate Dimensions
7.85 x 6.91 x 5.77 centimeters
(3.09 x 2.72 x 2.27 inches)
Approximate Weight
112.5 grams
(3.97 ounces)
- 3 - - 3 -