Return Adapter 1 683 356 138 For Delphi Cri; Adapter Cable 1 684 465 800 For Denso Cri; Adapter Cable 1 684 465 801 For Denso Cri; Adapter Cable 1 684 465 808 For Delphi Cri - Bosch EPS 200 Benutzerhinweise

en 16 | 1 687 205 016 | Product description
3.6.3 Return adapter 1 683 356 138 for Delphi CRI
The return adapter 1 683 356 138 (Fig. 4, item 1)
connects the return line of the Delphi CRI (Fig. 4,
item 2) to the return quantity test connection on
the EPS 200 / EPS 205 using the hose assemblies
1 680 712 249 and 1 680 712 289.
!
Before using the return adapter, check the O-ring
for damage. Change a defective or brittle O-ring.
Detached bits of the O-ring will damage the injec-
tor or the EPS 200 / EPS 205.
i
Secure the return adapter by pressing down the tab
(Fig. 4, item 3). To remove it, pull the tab up and
remove the return adapter from the return connec-
tion.
i
The hose assemblies 1 680 712 249 and
1 680 712 289 are included in the accessory set
1 687 010 399.
i
The included cover caps can be used to keep the
return adapters dust-free during storage.
3
Fig. 4: Return adapter 1 683 356 138
1 Return adapter 1 683 356 138
2 Return connection of the injector
3 Tab
|
1 689 989 314 2021-03-18
3.6.4
The adapter cable 1 684 465 800 connects the elec-
trical connection of the Denso CRI to the connection
X20 of the EPS 200 / EPS 205.
Fig. 5:
3.6.5
The adapter cable 1 684 465 801 connects the elec-
trical connection of the Denso CRI to the connection
X20 of the EPS 200 / EPS 205.
Fig. 6:
3.6.6
The adapter cable 1 684 465 808 connects the elec-
1
trical connection of the Delphi CRI to the connection
X20 of the EPS 200 / EPS 205.
2
Fig. 7:
Adapter cable 1 684 465 800 for Denso CRI
FD 1 684 465 800
Adapter cable 1 684 465 800
Adapter cable 1 684 465 801 for Denso CRI
FD 1 684 465 801
Adapter cable 1 684 465 801
Adapter cable 1 684 465 808 for Delphi CRI
FD 1 684 465 808
Adapter cable 1 684 465 808
458909-05_Pal
458909-06_Pal
458909-07_Pal
1
2
Robert Bosch GmbH