Environmental Conditions; Hydraulic Diagram - Nilfisk RS 1301 Betriebsanleitung, Originalanleitung

ENGLISH

ENVIRONMENTAL CONDITIONS

– In the environment where the machine operates, there
must not be any danger of explosion.
– To avoid inhaling exhaust gas, the machine must be used
only where there is a proper ventilation.
– The machine operates properly (*) in the following
environmental conditions:
• Temperature: +14 °F to +104 °F (-10 °C to +40 °C)
• Humidity: 30% to 95%
(*) When using the machine at ambient temperatures
between +14 °F and +32 °F (-10 °C and 0 °C), the dust
control system cannot be used; moreover the water tanks
and the dust control system itself must be empty.
18
USER MANUAL
33018310(3)2010-01 A

Hydraulic diagram

(See Fig. AY)
81. Hydraulic system oil tank
82. Suction fi lter
83. Drain fi lter
84. Drive system pump
85. Diesel engine
86. Left drive system motor
87. Accessory system distributor
88. Front skirt lifting cylinder
89. Hopper lifting cylinder
90. Hand pump
91. Side broom motor
92. Right drive system motor
93. Hydraulic system oil cooler
94. Solenoid valve
95. Suction inlet side shifting cylinder
96. Suction inlet lifting cylinder
97. Check valve
98. Hopper dumping cylinder
99. Power steering
100. Flow separator (priority valve)
101. Accessory and 3rd broom pump
102. Suction fan pump
103. Suction fan distributor
104. Front skirt distributor
105. Suction fan motor
106. 3rd broom distributor (*)
107. 3rd broom tilting cylinder (*)
108. 3rd broom second shifting cylinder (*)
109. Check valve (*)
110. 3rd broom lifting cylinder (*)
111. 3rd broom fi rst shifting cylinder (*)
112. 3rd broom motor distributor (*)
113. 3rd broom motor (*)
114. Power steering cylinder
115. Drive pedal assist
116. Suction fi lter
117. Suction fi lter
118. Suction fi lter
119. Double priority valve (*)
120. High-pressure washing system pump (*)
121. Accessory distributor pressure inlet
122. Drive wheel pressure inlet
123. Fan motor pressure inlet
124. 3rd broom distributor pressure inlet
125. Drive system safety solenoid valve
126. Snow brush control solenoid valve (*)
127. Salt spreader control solenoid valve (*)
128. Snow brush hydraulic motor (*)
129. Salt spreader hydraulic motor (*)
130. Snow brush tilting cylinder (*)
(*) Optional
RS 1301