Technical Data - Nilfisk RS 1301 Betriebsanleitung, Originalanleitung

TECHNICAL DATA

Dimensions and weights
Machine length
Machine length with rear pipe
Machine length with 3rd broom
Machine length with 3rd broom and rear pipe
Machine width
Distance between front and rear wheels
Front wheel base
Rear wheel base
Machine height with fl ashing light
Machine height with rain cap on muffl er
Machine height with bend pipe on muffl er
Minimum distance from the ground (skirts not included)
Maximum front working angle
Maximum dumping height
Front tyres
Rear tyres
Tyre pressure
Left/right broom diameter
Total machine weight, in running condition (without operator)
3rd broom weight
Total mass
Machine tare weight
Machine weight for shipment
Performance data
Maximum forward speed (for transport only)
Maximum working speed
Maximum reverse speed
Gradeability at full load
Minimum turning radius
Maximum side broom speed
Collection system
Cleaning width with 2/3 brooms
Filtering system
Sound pressure level at workstation (ISO/EN3744) at maximum working speed
Certifi ed sound power (2000/14/EC) at maximum working speed
Hopper capacity
Hopper maximum load
Dust control system
Dust control system tank total capacity (no. 2)
Tail lights
Transmission
Steering system
Brake
Parking brake
Controls
USER MANUAL
RS 1301 33018310(3)2010-01 A
ENGLISH
Values
139.8 in (3,550 mm)
147.6 in (3,750 mm)
156 in (3,960 mm)
163.8 in (4,160 mm)
53.1 in (1,350 mm)
71.6 in (1,820 mm)
44.9 in (1,140 mm)
42.3 in (1,075 mm)
92.7 in (2,355 mm)
86.6 in (2,200 mm)
88.8 in (2,255 mm)
3.5 in (90 mm)
15°
63.8 in (1,620 mm)
195 R 14C 106/104N (8 PR)
23x8.50-12 (10 PR)
72.5 psi (5 Bar)
25.6 in (650 mm)
6,173 lb (2,800 kg)
331.0 lb (150 kg)
8,818 lb (4,000 kg)
5,842 lb (2,650 kg)
6,019 lb (2,730 kg)
Values
13.7 mph (22 km/h)
7.4 mph (12 km/h)
5.0 mph (8 km/h)
24%
138.8 in (3,525 mm)
80 rpm
Suction
63.0/89 in (1,600/2,260 mm)
Metallic net
83 dB(A)
110 dB(A)
343.4 USgal (1,300 litres)
2,425 lb (1,100 kg)
By water
60.8 USgal (230 litres)
Road type
Hydrostatic servoassisted
On the rear axle, power assisted
Hydraulic
Mechanic
Electrohydraulic
15