Full-Body Eligible Mri Scan Conditions; Full-Body Eligible - Mri Equipment And Scan Requirements - Medtronic 37601 Handbuch

Full-body eligible MRI scan conditions

MR Conditional Full Body Scan Eligible
Before proceeding with this full-body eligible section, confirm that the information in "MRI
clinicians — Eligibility confirmation" has been followed and full-body scan eligibility has
been correctly identified on the MRI Eligibility Report.
Note: 3-T MRI scanning and MRI mode can be used only with the B35200
neurostimulator. Full-body MRI scan eligibility includes the head, torso, and extremity
scan locations.
Full-body eligible – MRI equipment and scan requirements
Starting with Table 2, use the check boxes to keep track of the appropriate MRI
equipment, settings, and scan conditions.
Warning: Scans must be conducted using the stated MRI equipment and scan
requirements. Failure to follow all warnings and guidelines related to MRI can result
in serious and permanent injury including coma, paralysis, or death.
Table 2. Full-body eligible – MRI equipment and scan requirements
MRI scanner manufacturers
MRI system type
[Select one:]
Maximum spatial field
gradient
RF coils
[Select one:]
2020-01-01 MRI guidelines for Medtronic deep brain stimulation systems 37601 37602 37603
There are no restrictions on MRI manufacturers.
1.5-T horizontal cylindrical system for hydrogen
imaging, approximately 64 MHz
For Model B35200 only: 3-T horizontal cylindrical
system for hydrogen imaging, approximately 128
MHz
1.5-T: 19 T/m (1900 gauss/cm)
3-T: 20 T/m (2000 gauss/cm)
RF Whole Body Transmit Coil (Integrated Transmit
Coil) with Receive coil: any type
Detachable Head Transmit/Receive Volume Coil
Detachable Lower Extremity Transmit/Receive
Volume Coil
English 25
37612 B35200