→ The prosthesis is then displayed on the main menu.
Delete existing connection (menu option "DELETE CONNECTION")
INFORMATION
The already existing connection can also be deleted. This connection must be re-established manually after the
search is completed.
16
1) Use the
,
keys to select the menu option "RC SETTINGS" in the main menu and confirm this with the
key (see fig. 16).
2) Use the
,
keys to select the menu option "DELETE CONNECTION" and confirm this with the
fig. 17).
To leave the menu without saving changes, use the
key.
3) Use the
,
keys to select the connection you want to delete and confirm this with the key (see fig. 18).
→ The connection is deleted.
→ The main menu is then displayed (see fig. 19).
8.7 Changing connections
If more than one prosthesis is stored, a user can toggle between the stored prostheses.
8.7.1 Changing connections (with remote control switched off)
20
1) Use the key to activate the remote control.
2) Press the
key to start a prosthesis search.
→ All prostheses that are already stored are displayed. The currently connected prosthesis is already selected
(see fig. 20).
3) Use the
,
keys to select the prosthesis required.
4) Confirm with the key (see fig. 21).
→ Once the connection has been established successfully, the data are read from the prosthesis (see fig. 22).
This process may take a few minutes.
Once the connection has been established successfully, the main menu appears with the name of the connected
prosthesis (see fig. 23).
C-Leg 3C98-3/3C88-3
17
21
18
key to select the
22
Remote control
19
symbol and confirm this with the
23
Ottobock | 73
key (see