Changing Remote Control Settings - Ottobock C-Leg 3C98-3 Gebrauchsanweisung

5
1) Once a connection has been established, use the ,
menu and confirm this with the key.
2) Use the , keys to select the following information:
Menu option
TRIP:1747
STEP:1747
BATT.:68
BLUETOOTH

8.5 Changing remote control settings

8
1) Use the , keys to select the menu option "RC SETTINGS" in the main menu and confirm this with the
key.
2) Use the , keys to select from the following settings:
Changing time and date (menu option "16:22/06.02.14 or PM 4:22/02-06-14")
1) Press the key.
2) Use the , keys to select the appropriate option. You can use the
toggle between 12-hour mode and 24-hour mode.
3) Use the , keys to change the option.
4) Press the key to save the changes and leave the menu.
Establishing connection to prosthesis or setting up additional connections (menu option "PAIRING")
Up to four prostheses can be managed using this remote control (see Page 72).
Change font size on remote control display (menu option "ZOOM")
1) Press the key.
2) Use the , keys to select the font size you want (see fig. 10):
"1" – normal font
"2" – large font
3) Press the key to save your changes.
To leave the menu without saving changes, use the
key.
Deleting connection to prosthesis (menu option "DELETE CONNECTION")
Prosthesis connections that were already stored can be deleted. See next section.
C-Leg 3C98-3/3C88-3
6
Description
Daily step counter
Total step counter
Current prosthesis charge level, as a
percentage
Switch Bluetooth function of the
prosthesis on or off
9
7
keys to select the menu option "STATUS" in the main
Possible actions
Reset the counter by using the key
to confirm the menu option
For informational purposes only
For informational purposes only
The Bluetooth function of the pros­
thesis can be switched on or off by
using the
option.
10
>
, keys at the beginning of the line to
key to select the
Remote control
key to confirm the menu
11
symbol and confirm this with the
Ottobock | 71