Securing A Patient With The X-Restraint/Rugged™-X (6500-001-430/6506-001-430) Restraint Straps - Stryker Performance-PRO XT Bedienungsanleitung

English
Securing a patient with the X-restraint/RUGGED™-X (6500-001-430/6506-001-430)
EN
restraint straps (Continued)
Restraint strap attachment locations should provide strong anchorage and proper restraint position
1-34). Do not allow restraint straps to interfere with equipment or accessories. Buckle the restraints across the
shoulders, waist, thighs, and ankles. Buckle all restraint straps when the cot is not in use.
1. Installing the X-restraint/RUGGED-X shoulder restraints on page 1-34
2. Installing the X-restraint/RUGGED-X waist restraints on page 1-35
3. Installing the X-restraint/RUGGED-X thigh restraints on page 1-35
4. Installing the X-restraint/RUGGED-X ankle restraints on page 1-36
5. Installing the X-restraint/RUGGED-X ankle restraints on page 1-36
Installing the X-restraint/RUGGED-X shoulder restraints
To install the X-restraint/RUGGED-X shoulder restraints:
1. Wrap the restraint around the cot frame.
2. Pull the restraint buckle through the loop, toward the head end of the cot.
3. Feed the buckle under the XPS System.
1-34
1
2
3
Figure 1-18: Restraint strap attachment locations
Operation
6086-209-005 REV G
(Figure 1-18 on page
4
www.stryker.com