Stryker Performance-PRO XT Bedienungsanleitung Seite 44

English
Installing the defibrillator platform (Continued)
EN
To install the defibrillator platform:
1. Place the defibrillator platform in the stored position
2. Open and expand the defibrillator platform legs
3. If the product is equipped with an IV pole, raise the IV pole (A) to the up position
4. Place the defibrillator platform on the product frame.
5. Position the inside legs (B) of the defibrillator platform toward the head end of the product
39).
1-38
Figure 1-24: Stored position
Operation
(Figure 1-24 on page 1-38).
(Figure 1-25 on page 1-38).
Figure 1-25: Open defibrillator platform legs
6086-209-005 REV G
(Figure 1-26 on page 1-39).
(Figure 1-26 on page 1-
www.stryker.com