Stryker Performance-PRO XT Bedienungsanleitung Seite 56

English
Regular inspection and adjustments (Continued)
EN
Item
Litter
Base
X-frame
Kickstand (optional)
Head section
Accessories (optional)
Every six months or 12 hours
Inspect these items every six months or 12 hours, whichever comes first.
Item
Electronic controls
Switches
Litter
Mattress
Base
Wheels
Head section
1-50
Preventive maintenance
Inspect
Cot does not lower when you pull the manual backup
release handle with 100 lb (45 kg) or more on the cot
All fasteners are secure
Backrest cylinder operates
Adjust pneumatic cylinder for full range of motion, if
required
Dead stop (6085-001-094) for wear
All fasteners are secure
X-frame expands and retracts
Retracts fully to the transport position
Bolts are tightened
All fasteners are secure
Head section extends and locks
All accessories operate (such as IV pole, head extension
and pillow, and restraint extender)
Inspect
Extend cot to raised position, measure and check load
height
Jog function operates
High speed retract works
No damage or wear to either switch
Both switches operate
No bent, broken, or damaged components
No damage or tears on cot grips
Siderails operate and latch
Foot rest operates
No cracks or tears
No bent, broken, or damaged components
Cot retaining post is secure. If not, replace the screw
No excessive damage to X-frame guards
Free of debris
No bent, broken, or damaged components
6086-209-005 REV G www.stryker.com