Introduction; Product Description; Indications For Use; Expected Service Life - Stryker Performance-PRO XT Bedienungsanleitung

This manual assists you with the operation or maintenance of your Stryker product. Read this manual before operating
or maintaining this product. Set methods and procedures to educate and train your staff on the safe operation or
maintenance of this product.
CAUTION
• Improper usage of the product can cause injury to the patient or operator. Operate the product only as described in
this manual.
• Do not modify the product or any components of the product. Modifying the product can cause unpredictable
operation resulting in injury to patient or operator. Modifying the product also voids its warranty.
Notes
• This manual is a permanent part of the product and should remain with the product even if the product is sold.
• Stryker continually seeks advancements in product design and quality. This manual contains the most current
product information available at the time of printing. There may be minor discrepancies between your product and
this manual. If you have any questions, contact Stryker Customer Service or Technical Support at 1-800-327-0770.

Product description

The Stryker Model 6086 Performance-PRO™ XT is a manual ambulance cot that consists of a platform mounted on a
wheeled X-frame designed to support and transport a maximum weight of 700 lb (318 kg) in pre-hospital and hospital
environments.
The device is collapsible for use in emergency vehicles and has an adjustable load height feature to allow the device to
be set to different ambulance deck heights for proper body mechanics during loading and unloading. Duplicate foot end
controls on the upper and lower lift bars accommodate different operator positions or sizes and the side release handle
allows a single operator to raise and lower an unoccupied cot. The device is equipped with a retractable head section
for 360-degree mobility in any height position, siderails, patient restraint straps, an adjustable pneumatic backrest, and
various optional accessories that assist with transport of the patient. Maximum patient comfort is attainable with the
three different litter positions of shock, flat leg, and optional knee gatch positioning.

Indications for use

The Stryker Performance-PRO XT is a non-powered wheeled stretcher, which is intended to support and transport the
entire body of a traumatized, ambulatory, or non-ambulatory human patient (includes infants and adults).
The device is designed to support patients in a supine (horizontal) or sitting position and facilitate the transportation of
associated medical equipment (such as oxygen bottles, monitors, or pumps) in emergency or transport vehicles. This
ambulance cot is intended for use in pre-hospital and hospital environments, in emergency and non-emergency
applications. It is rated to a maximum capacity of 700 lb (318 kg) (sum of the patient, mattress and accessory weight)
and the intended operators of the device are trained professionals including emergency medical service and medical
care center personnel, as well as medical first responders. Ambulance cots are intended for transportation purposes.
Performance-PRO XT is not intended for extended stay or use as a hospital bed or in devices that modify air pressure,
such as hyperbaric chambers.

Expected service life

Performance-PRO XT cot has a seven year expected service life under normal use conditions and with appropriate
periodic maintenance.
www.stryker.com

Introduction

6086-209-005 REV G
English
EN
1-7