Herunterladen Diese Seite drucken

Raising Or Lowering The Backrest; Raising Or Lowering The Siderails; Raising Or Lowering The Siderails (Xps Option); Extending The Retractable Head Section - Stryker Performance-PRO XT Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Performance-PRO XT:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 175

Raising or lowering the backrest

To raise the backrest, squeeze the backrest adjustment handle to move the backrest to the desired height.
To lower the backrest, squeeze the backrest adjustment handle while you push down on the backrest to the desired
height.

Raising or lowering the siderails

Always lower the siderails when you transfer a patient to the cot or from the cot.
WARNING
Do not use siderails as a patient restraint device.
To raise the siderails, lift up on the siderail until the latch clicks and the siderail locks into place. Always keep the
siderails in the raised position unless you are transferring the patient.
To lower the siderails, squeeze the siderail release handle to release the siderail latch. Guide the siderail down toward
the foot end of the cot until the siderail lays flat. Always lower the siderails when you transfer a patient to or from the cot.

Raising or lowering the siderails (XPS option)

You can order your cot with the expandable patient surface (XPS) option or upgrade your cot to add the XPS option.
WARNING
Do not use siderails as a patient restraint device.
CAUTION
Do not sit or stand on the siderails (XPS option).
Do not use the siderails (XPS option) as a patient transfer device or surface (for example, to slide a patient from
the cot to another surface).
Do not position patients with full weight on the siderails (XPS option).
Do not use the siderails (XPS option) as a push/pull device or to steer the product.
Siderails (XPS option) attach to the cot and are always available for your use. The siderails (XPS option) adjust
according to patient size and lock into seven positions. The siderails also adjust to fit through standard doorways or
elevators.
To raise the siderails, lift up on the siderail until it locks into the desired position.
To lower the siderails, lift up to relieve the weight, then pull the red lever. Always lower the siderails when you transfer a
patient to or from the cot.
The XPS option is not a primary patient support surface. It includes a wider mattress and is intended to enhance patient
comfort.

Extending the retractable head section

Extend the retractable head section before you load the cot into the vehicle patient compartment.
www.stryker.com
Operation
6086-209-005 REV G
English
EN
1-27

Quicklinks ausblenden:

Werbung

loading