Speed Meter - Yamaha WaveRunner Gp1200R Wartungshandbuch

– +
ELEC
YAMAHA
8
km/h
HOUR
7
6
5
4
3
2
1
x1000r/min
3
INDICATION SYSTEM
FUEL
MULTI
DISPLAY
WARNING
4
Make sure the water temperature sym-
bol 3 display and "WARNING" lamp
4 on, and the buzzer sounds continu-
ity.

Speed meter

1. Check:
Speed meter output voltage
Within specification → Check the speed
sensor output voltage and pulses.
Out of specification → Replace.
Speed meter output voltage:
10.5 V
Checking steps:
Supply DC 12 voltage to the natural
color six-pin connector (+: red, –:
black) with a battery.
Connect the green and red terminals
with a jumper lead 1.
Measure the voltage on the speed sen-
sor connector (white color three-pin
connector) between the red/white and
black leads.
7-39
E