Bearing, Driven Coupling Shaft, And Grease Hose Inspection; Driven Coupling Inspection; Bearing Installation; Oil Seal Installation - Yamaha WaveRunner Gp1200R Wartungshandbuch

JET
PUMP
BEARING HOUSING
Bearing, driven coupling shaft, and grease
hose inspection
1. Inspect:
Bearing
Rotate the inner race by hand.
Damage/rough movement → Replace.
Intermediate drive shaft
Damage/pitting → Replace.
Grease hose
Cracks/wear → Replace.

Driven coupling inspection

1. Inspect:
Driven coupling
Driven coupling damper
Damage/wear → Replace.

Bearing installation

1. Install:
Circlip (rear)
2. Install:
Bearing
Driver rod:
YB-06071/90890-06606
Bearing outer race attachment:
YB-06016/90890-06626

Oil seal installation

1. Install:
Oil seal
Driver rod:
YB-06071/90890-06606
Bearing outer race attachment:
YB-06016/90890-06626
NOTE:
Before installing the oil seal, lubricate the
clip glove with water resistant grease.
Distance a:
6.8 ~ 7.2 mm (0.27 ~ 0.28 in)
6-20
E