Inhaltsverzeichnis
Werbung
INSP
ADJ
3
CONTROL SYSTEM
2
1
PERIODIC SERVICE
CONTROL SYSTEM
Steering column inspection
1. Inspect:
Steering column
Excessive play → Replace the steer-
ing column.
Refer to "STEERING COLUMN" in
chapter 8.
Inspection steps:
Move the handlebar up and down and
back and forth.
Check the excessive play of the han-
dlebar.
Steering cable inspection and adjustment
1. Inspect:
Distance a, b
Out of specification → Adjust.
Inspection steps:
Turn the handlebar from lock to lock.
Measure distances a and b.
If the difference is not within specifica-
tion, adjust the cable joint.
Difference of distances a and b:
Maximum 5 mm (0.2 in)
2. Adjust:
Steering cable joint
(steering column side)
Adjustment steps:
Loosen the locknut 1.
Disconnect the steering cable joint 2
from the ball joint 3.
Turn the cable joint in or out for adjust-
ing the distances a and b.
Turn in
Turn out
3-2
Distance a is increased.
Distance b is increased.
E
- Quicklinks:
- Inhaltsverzeichnis
- Deutsch
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
