Oil Level Gauge - Yamaha WaveRunner Gp1200R Wartungshandbuch

– +
ELEC
YAMAHA
8
km/h
HOUR
7
6
5
4
3
2
1
x1000r/min
3
INDICATION SYSTEM
FUEL
MULTI
DISPLAY
WARNING
4

Oil level gauge

1. Check:
Oil level gauge
Not operating → Replace the multi-
function meter.
Checking steps:
Supply DC 12 voltage to the natural
color six-pin connector (+: red, –:
black) with a battery.
Disconnect the white two-pin connec-
tor (blue and black leads).
Connect the blue and black terminals
with a jumper lead 1.
Connect the green and red terminals
with a jumper lead 2.
NOTE:
If the jumper lead is installed for more
than 30 seconds, the display will auto-
matically turn off.
Remove the jumper lead 1 from the
white two-pin connector.
Disconnect the jumper lead 2 and
then connect it to green and red ter-
minal again.
Make sure the oil symbol 3 and
"WARNING" lamp 4 blinks, and the
buzzer sounds intermittently.
7-37
E