Replacing Parts; Replacing Fuses; Figure 5-2 Locate And Access Fuses - High End Systems x.Spot Xtreme Handbuch

Replacing Parts

Warnings: Disconnect power before servicing.
Replace fuses with the specified type and rating only.
Equipment surfaces may reach temperatures up to 130° C (266° F).
Allow the fixture to cool before handling.

Replacing Fuses

To replace a fuse:
1. Disconnect power to the fixture. If the fixture has been operating, allow the
fixture to cool before handling.
2. Use Figure 5-2 with Table 5-1 to determine which fuse to replace and its location
A
C
B
5-2 General Maintenance

Figure 5-2 Locate and access fuses.

F
E
D
H
G
x.Spot
D
E
Xtreme User Manual
®