Dim - High End Systems x.Spot Xtreme Handbuch

Table 4-2 Lamp Control and Shutter Parameter Settings
Lamp Function
Setting
Closed
Values 96-127
Dual Dimming
Open
Close
Periodic Strobe
Random/Random Strobe
Random/Synchronous Strobe
Values 128-159
Ramp Open/Snap Shut
Electronic
Snap Open/Ramp Shut
Dimming™
Ramp Open/Ramp Shut
Random Ramp/Snap
Random Snap/Ramp
Open
* Before another Boost or Lightning effect can occur, the Shutter channel must
be moved to either closed or open, or the Lamp Function channel must be
moved outside the Lamp Effects range.

Dim

The Dim parameter is controlled with DMX Channel 7. The Dim parameter provides
full mechanical dimming capability without changing the color temperature or the
beam shape. The dim values range from closed (DMX value of 0) to fully open (DMX
value of 255). The Lamp Function channel, (see page 4-5), can be set to control
whether the Dimming is accomplished by lower lamp power (electronic), closing the
shutter (mechanical) or both (dual dimming). Table 4-2 describes the interaction
between the Lamp Function, Shutter and Dim Channels.
x.Spot Xtreme User Manual
®
Shutter Setting
The lamp electronically dims below rated
wattage as the mechanical dimming goes from
0%–100%.
The shutter functions are the same as the
normal shutter function range.
Strobing and Dimming is accomplished
electronically by adjusting the lamp power.
Dimming will not go to black.
Description
DMX Programming
4
4-7