Six-Wheel Color Mixing Module Parameters; Static Color Function; Figure 4-3 X.spotxtreme Color Wheel Assembly; Table 4-5 Static Color Function Descriptions - High End Systems x.Spot Xtreme Handbuch

Six-Wheel Color Mixing Module Parameters

This module is the standard option for Slot 1 in x.SpotXtreme fixtures. It combines a
static color wheel with three color mixing wheels and two color correction wheels as
shown in Figure 4-3.
• The static color wheel contains 5 dichroic filter "wedges" plus open (white).
• The cyan, magenta, and yellow color mixing wheels have graduated color from
open (white) to full saturation.
• Color Temperature Orange (CTO) and Color Temperature Blue (CTB) wheels
provide variable color temperature correction and beam flatness control.

Figure 4-3 x.SpotXtreme color wheel assembly

Static Color Function

The Static Color function is controlled with DMX Channel 15. This parameter
determines how the fixed color wheel moves. The Static Color Function parameter
can be enabled in either full speed (controller crossfading the wheel positions), or
MSpeed (MSpeed control of the wheel motor). For more information on MSpeed, see
"MSpeed (Motor Speed)" on page 4-9. Table 4-5 describes the Static Color Functions
available on the x.SpotXtreme fixture.

Table 4-5 Static Color Function Descriptions

Color Function
Allows the color wheel to take the quickest path and snap to the chosen whole or
Indexed
half color.
Forward Spin Allows a forward color wheel spin at variable speeds.
Reverse Spin Allows a reverse color wheel spin at variable speeds.
x.Spot Xtreme User Manual
®
Description
DMX Programming 4-11
4