Inhaltsverzeichnis
Werbung
Lamp Life Limit
Use this menu option to display the warning message Lamp Life Error when the
current lamp hours reach the rated lamp life. When the LAMP LIFE LIMIT parameter
is enabled, the fixture tracks the number of hours the lamp is on. At 650 hours, it
displays an error message. At 710 hrs., the lamp shuts off, and the fixture will not
strike until the lamp is replaced and the lamp hours are reset to 0. See "Replacing the
Lamp" on page 5-4 and "Lamp HR/Strike Reset" on page 3-27.
To enable the LAMP LIFE LIMIT parameter:
1.
Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top
level to SET PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Navigation button, scroll to LAMP LIFE
LIMIT.
4. Using the up and down arrows on the Navigation button, choose the ENABLE
option and press Enter to select.
Data Loss Timeout
Use this menu option to determine how the fixture will react in the event of DMX
data loss. Set the shutter to stay open until shutdown or to close one second after
data loss.
To set the DATA LOSS TIMEOUT:
1.
Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top
level to SET PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Navigation button, scroll to DATA LOSS
TIMEOUT.
4. Using the up and down arrows on the Navigation button, choose LONG to keep the
shutter open until shutdown, or SHORT to close the shutter 1 second after data
loss and press the Enter button to select.
x.Spot
Xtreme User Manual
®
Fixture Operation
3-19
3
Werbung
Inhaltsverzeichnis
