Inhaltsverzeichnis
Werbung
Gobo 2 Position
The Gobo 2 Position parameter is controlled with DMX Channel 34. A position can be
set at the center of any of the eight apertures on the gobo.
Gobo 2 Rotate Function
The Gobo 2 Rotate Function parameter is controlled with DMX Channel 35. Gobo 2
Rotate refers to the motion of the individual apertures. The Gobo 2 Function
parameter setting determines which rotate options are available. Table 4-11 lists the
Gobo 2 Rotate setting.
Table 4-11 Gobo2 Rotate Functions and Available Options
T
Gobo Rotate
Function
Indexed
Position stop on
Scan
selected aperture at 0°
to 360° of rotation
Blink
Forward Rotate
Forward Rotate
Reverse Rotate
Reverse Rotate
Gobo 2 Rotate Coarse/Fine
DMX Channel 36 controls the Rotate Coarse parameter on the Gobo 2 wheel. Rotate
Coarse determines the coarse adjustment in 8-bit increments of the effect apertures'
rotation position in the Indexed, Scan and Blink modes. In Forward and Reverse
modes, DMX values of 0-3 set the rotation to stop and set speed from slow (DMX
value = 4) to fast (DMX value = 255).
The Gobo Rotate Fine parameter allows for fine adjustment (16-bit increments) of the
aperture rotation position in the Indexed, Scan and Blink modes. Gobo 2 Rotate Fine
is controlled with Channel 37.
4-18
DMX Programming
Gobo Rotate option
Description
Rotates the specified indexed aperture to any
position
Oscillates the selected aperture wheel at a factory-
determined range and speed.
Closes and opens the shutter on rotate position
changes
Forward aperture rotation from slowest to fastest
Reverse aperture rotation from slowest to fastest
x.Spot
Xtreme User Manual
®
Werbung
Inhaltsverzeichnis
