Inhaltsverzeichnis
Werbung
Before sending anything to the factory, call your High End Systems dealer/distributor
for a Return Material Authorization (RMA) number. The factory cannot accept any
goods shipped without an RMA number.
Installing a Power Cord Cap
x.SpotXtreme fixtures are shipped without an attached power cord cap. Different
locations (even within the same country) may require a different power cord cap to
connect the fixture to a power outlet.
Because of the variety of power cord caps used worldwide, High End Systems, Inc.
cannot make specific recommendations for the power cord cap.
Contact a local authority for the type of power cord cap needed. When installing the
power cord cap, note that the cores in the mains lead are colored in accordance with
the following code:
•
green and yellow = earth
•
blue = neutral
•
brown = live
Warning:
Class 1 equipment - This equipment must be earthed.
Installing a Line Cord Cap - U.K. Only
In the United Kingdom, the colours of the cores in the mains lead of this equipment
may not correspond with the colored markings identifying the terminals in the
fixture's plug. Therefore, install a line cord cap in accordance with the following
code:
•
The core which is coloured green and yellow must be connected to the plug
terminal which is marked with the letter "E," or by the earth symbol
coloured green, or green and yellow.
•
The core which is coloured blue must be connected to the terminal which is
marked with the letter "N" or coloured black.
•
The core which is coloured brown must be connected to the terminal which
is marked with the letter "L " or coloured red.
Warning:
Class 1 equipment - This equipment must be earthed.
Vatic Fitter Heads Information - Danmark
Advarsel: Beskyttelse mod elektrisk chock.
Vigtigt!
Lederne med gul/groen isolation maa kun tilsluttes en klemme maerket
2-2
Setup and Configuration
eller
x.Spot
Xtreme User Manual
®
, or
Werbung
Inhaltsverzeichnis
