Editing Scene Parameters By Slot; Figure 3-3 Edit Scene Menu Options In Standard X.spotxtreme Fixture - High End Systems x.Spot Xtreme Handbuch

FIXTURE MODE MENU, the operator can access the 16 scenes for that user mode. For
more information, see "Select User Mode" on page 3-20.

Editing Scene Parameters by Slot

The x.SpotXtreme fixture parameters are associated with the chassis or the module
they control, and appear as level 3 menu items in the Onboard Preset Menu. Figure 3-
3 shows the functions controlled in the Edit Scene menu.

Figure 3-3 Edit Scene Menu Options in Standard x.SpotXtreme fixture

PLAYBACK
CHASSIS SLOT 1
STATIC COLOR
SHUTTER
DIM
STATIC COLOR
LAMP FUNCTION
MIX COLOR
PAN
TILT
MIX COLOR
FROST
FOCUS FUNCTION
FOCUS POSITION
ZOOM
M-SPEED
MACRO
When a scene is edited, the new values become part of the currently programmed
sequence. Exit the ONBOARD PRESETS MENU with Playback ON, to view the
programmed sequence with the modified scene values.
The following SCENE EDIT example describes steps to create a tricolor rotating
tunnel with a ramping size change. All module parameters and values are for a
Standard Configuration x.SpotXtreme fixture, see "Standard Configuration" on page
1-1.
x.Spot Xtreme User Manual
®
ONBOARD PRESET
MENU
COPY SCENE
EDIT SCENE #
MENU
SLOT 2
GOBO 1
FUNCTION
FUNCTION
GOBO 1
POSITION
GOBO 1 ROTATE
FUNCTION
FUNCTION
GOBO 1 ROTATE
EFFECT
FUNCTION
CYAN
EFFECT POSITION
MAGENTA
EFFECT ROTATE
FUNCTION
YELLOW
EFFECT ROTATE
CTO
CTB
CAPTURE DMX DEFAULT
TO SCENE SCENE
SLOT 3 TIMING
GOBO 2
X-FADE TIME
FUNCTION
GOBO 2
DELAY TIME
POSITION
GOBO 2 ROTATE
TIMEBASE
FUNCTION
GOBO 2 ROTATE
IRIS
Fixture Operation
3
SEND SCENE TO
OTHER FIXTURES
ZERO SCENE
3-9