Inhaltsverzeichnis
Werbung
Display Error Messages
8 Character
16 Character Error
Error Message
Message
LITETOUT
LAMP TOUT
Wire Harness Connections
lamp power supply
lamp power supply
lamp power supply
ignitor harness
top box harness
top box harness
main head harness
Location
Throughout fixture
pan board
ignitor
relay
ignitor board
ignitor board
relay ignitor
harness
lamp socket
relay
pan board
interlock switch
tilt harness
pan harness
pan harness
top box harness
tilt harness
main head harness
Problem/Procedure
For replacement parts, see "Contacting High End Systems®" on page ii
Lamp is off:
1. Lamp may by too hot to strike. Wait several minutes for lamp to cool,
try striking lamp, see"Lamp State" on page 3-23.
2. Verify Pan board with another 3-phase board from fixture,
see"Replacing a Driver Board" on page 5-6.
3. Check that wire harness is connected and undamaged.
4. Check for damage to lamp or interlock switch. To replace lamp, see
"Replacing the Lamp" on page 5-4.
5. Relay,Lamp power supply, or ignitor needs to be replaced.
Werbung
Inhaltsverzeichnis
