3. Use the left and right arrows on the Navigation button to scroll to the
LAMP HR/STRIKE RESET option and press the Enter button to select.
4. Use the up and down arrows on the Navigation button to scroll to YES. Press and
hold the Enter button down for 5 seconds to select.
Lamp Status
This option displays the current Lamp Status as LAMP OFF, LAMP ON,
LAMP STRIKING, or LAMP ERROR.
Software Version
This option display's the fixture's CPU board Software version. The version number
is composed of: V(Major).(Minor).(Build)
Display Errors
This menu option displays current errors in a descriptive 32-character text field.
To DISPLAY ERRORS:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Use the left and right arrows on the Navigation button to scroll to the
INFORMATION MENU and press the Enter button to select.
3. Use the left and right arrows on the Navigation button to scroll to the DISPLAY
ERRORS menu option and press the Enter button to select.
4. Use the up and down arrows on the Navigation button to view the list of current
errors.
Channels Needed
The x.SpotXtreme modular design allows for multiple configurations, each requiring
a different channel range based on the parameters for the particular modules loaded
on the fixture, see "Determining DMX Start Channel Assignment" on page 3-6. Use
this option to view the number of channels required (channel range) for the fixture's
specific configuration. The standard configuration x.SpotXtreme fixture has a 38-
channel range.
Next DMX Channel
Use this option to view the next available DMX Start channel on the link following
this fixture and is based on the fixture's specific configuration. The value displayed
uses the formula (current Start channel + channels needed for this fixture +1).
3-28 Fixture Operation
x.Spot
Xtreme User Manual
®