Rotating Gobo And Iris Module Parameters; Gobo 2 Function; Figure 4-6 Rotating Gobo 2 Lithopatterns; Table 4-10 Gobo 2 Function Descriptions - High End Systems x.Spot Xtreme Handbuch

Rotating Gobo and Iris Module Parameters

Rotating Gobo and Iris is the standard Slot 3 Module for the x.SpotXtreme fixture. It
contains one 8-position Gobo wheel with seven rotating lithopatterns (plus open) and
a variable iris, (see Figure 4-6).
Position 7
Irregular Craters
In the following parameter descriptions, the term
of the large wheel and
wheels holding individual lithopatterns.

Gobo 2 Function

The Gobo 2 Function parameter is controlled with DMX Channel 33. This parameter
determines how the Gobo wheel moves. Table 4-10 describes the Gobo 2 Function
parameter. It can be enabled in either full speed (controller crossfading the wheel
positions), or MSpeed (MSpeed control of the wheel motor). For more information,
see "MSpeed (Motor Speed)" on page 4-9.

Table 4-10 Gobo 2 Function Descriptions

Gobo 2 Function
Allows the gobo wheel to take the quickest path and snap to the chosen
Indexed
effect.
Forward Wheel Spin Allows a forward gobo wheel spin at variable speeds.
Reverse Wheel Spin Allows a reverse gobo wheel spin at variable speeds.
Scan Oscillates the gobo wheel at a factory-determined range and speed.
Random Selects random effect positions at variable speeds.
Blink Wheel Closes and opens the shutter on wheel position changes.
Continuous Sets a crossfade as the wheel moves between chosen aperture positions.
x.Spot Xtreme User Manual
®
Position 1
Open
Position 8
Valiant
Position 6
Fluffy Clouds
Position 5
Gatlin Gun

Figure 4-6 Rotating Gobo 2 Lithopatterns

Rotate
refers to motion of the smaller aperture
Position 2
Fracture
Position 3
Polymeoba
Position 4
Dense Foliage
Spin
indicates motion
Description
DMX Programming 4-17
4