High End Systems x.Spot Xtreme Handbuch Seite 46

To access a Scene for editing:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top
level to ONBOARD PRESETS MENU and press the Enter button to select
3. Using the left and right arrows on the Navigation button, scroll to EDIT SCENE##.
4. Use the up and down arrows on the Navigation button to scroll to the number of
the scene for editing (in this example, SCENE 1) and press the Enter button to
select.
Entering a scene number causes the fixture to begin play the current settings for
that scene. Scrolling to a new option or setting causes the fixture to play the
effect, but not to store it into memory until the Enter button is pressed.
Note: To edit one of the other User mode's 16 scenes, see "Select User Mode" on
page 3-20.
To edit the Chassis parameters:
5. CHASSIS is the first option in the Level 3 Menus. Press the Enter button to select.
6. Using the left and right arrows on the Navigation button, scroll to SHUTTER.
7. Use the up and down arrows to scroll to SNAP/RAMP 26 to open the shutter at full
speed, then ramp shut, and press the enter button to select.
8. Using the left and right arrows on the Navigation button, scroll to FOCUS.
9. Use the up and down arrows to scroll to set the FOCUS value to 20%*, and press
the enter button to select.
10. Using the left and right arrows on the Navigation button, scroll to ZOOM.
11. Use the up and down arrows to scroll to set the ZOOM value to 10%*, and press the
enter button to select.
* Adjust these values as needed for the distance between the fixture and the
lighted surface.
To edit the Slot 1 parameters:
12. Press the Menu button to return to Level 3 Menus. Use the left and right arrows
on the Navigation button, to scroll to SLOT 1 and press the Enter button to
select.
13. Use the left and right arrows on the Navigation button to scroll to
STATIC COLR FUNC.
14. Use the up and down arrows to scroll to BLINK, and press the enter button to
select. BLINK closes, then reopens the shutter between indexed color changes.
15. Use the left and right arrows on the Navigation button to scroll to
STATIC COLOR.
3-10 Fixture Operation x.Spot Xtreme User Manual
®