Inhaltsverzeichnis
Werbung
Navigational Basics
1.
Unlock the Menu system by pressing the Menu
the display goes to the 2-line format.
2. Use the left and right arrows
through Menu options at the current level.
3. Stop at the desired menu and press the Enter
Note: The new option will not be stored unless the Enter button is pressed.
4. If there is another level of menu choices repeat Steps 2 and 3.
5. At the option or setting level of the menu, use the up and down arrows on the
Navigation button
until the Enter button is pressed. Pressing the Enter button stores the new value
for that option. Pressing the Menu button returns to the previous menu level
without changing the value of an option.
6. Continue pressing the Menu button to move back up levels until exiting the menu
system.
Display in Menu Locked Mode
The x.SpotXtreme display panel gives access to the fixture's onboard Menu System.
When the Menu System is in locked mode, the panel displays in large 8-character
words designed to be viewed from a distance. Under normal circumstances, when the
display is locked, it cycles between displaying the fixture's software version
[V##.##], the High End Systems logo, the x.Spot logo, the fixture's configuration
type [STANDARD] and the fixture's DMX start channel [DMX_C###]. Any errors present
are also displayed in an 8-character error description. Chapter 3 describes the menu
system in detail.
Fixture Software Version
The software version loaded on the fixture can vary even between units purchased at
the same time. "Verifying and Uploading Fixture Software" on page 2-10 describes
the procedures to ensure that all x.SpotXtreme fixtures on the link are running the
latest software.
Fixture Configuration Type
The configuration type indicates the fixture's modular setup. The STANDARD
configuration shown in the example above contains Six-Wheel Color Mixing in Slot
1, Dual Rotating Gobos in Slot 2 and Rotating Gobo and Iris in Slot 3. See Table 3-2
on page 3-20 for alternate 8-character configuration type descriptions.
DMX Start Channel
The DMX Start Channel is the first channel currently assigned to that fixture in its
range of channels on a DMX link. To reset the DMX start channel, see "Setting DMX
x.Spot
Xtreme User Manual
®
on the 4-way Navigation button to scroll
to scroll to the desired option or setting. The option flashes
button for a few seconds until
button to select.
Fixture Operation
3
3-3
Werbung
Inhaltsverzeichnis
