Inhaltsverzeichnis
Werbung
Display Error Messages
8 Character
16 Character Error
Error Message
Message
CTO HOMING TAB
CTO TAB
NOT FOUND
COLOR 1 HOMING
COLOR
TAB NOT FOUND
CYAN HOMING
CYAN
TAB NOT FOUND
MAGENTA HOMING
MAGENTA
TAB NOT FOUND
CTB HOMING
CTB TAB
TAB NOT FOUND
YELLOW HOMING
YELLOW
TAB NOT FOUND
Location
Color mix module 2-phase board
M2 on Tilt board side of fixture.
Color mix module 2-phase board
M3 on Tilt board side of fixture.
Color mix module 2-phase board
M4 on Tilt board side of fixture.
Color mix module 2-phase board
M2 on side opposite tilt board.
Color mix module 2-phase board
M3 on side opposite tilt board.
Color mix module 2-phase board
M4 on side opposite tilt board.
Problem/Procedure
For replacement parts, see "Contacting High End Systems®" on page ii
Color mix wheel is not homing correctly:
1. Check if broken Color mix wheel is or another obstruction is
preventing tab from being found.
2. Check connection of Color mix sensor S2 at sensor and board.
3. Check Color mix wheel wire connections to motor and board.
4. Check for Color mix board malfunction by substituting another
2-phase boards from the fixture, see "Replacing a Driver Board" on
page 5-6.
5. Check that Color mix wheel homing Wheel sensor is installed.
6. Check that Set screws on color mix wheel hub and color mix drive
gear hub are tight.
7. Check that Drive gear is aligned with wheel gear.
8. Check for a missing thrust washer causing two wheels to move
simultaneously.
9. Check for dead color mix sensor, color mix board, color mix motor.
10.Check for Color mix wire harness damage.
Werbung
Inhaltsverzeichnis
