Inhaltsverzeichnis
Werbung
Display Error Messages
8 Character
16 Character Error
Error Message
Message
LAMP FAN 1
LAMPFAN1
STOPPED
LAMP FAN 2
LAMPFAN2
STOPPED
OPTICS FAN
OPTCFAN
STOPPED
TOP BOX FAN 1
TOPBFAN1
STOPPED
TOP BOX FAN 2
TOPBFAN2
STOPPED
HEAD TEMP 1
LMP1TEMP
MISSING
HEAD TEMP 2
LMP2TEMP
MISSING
TOP BOX TEMP
TOPTEMP
MISSING
Location
Lamp fan on side with tilt board.
Connects to Tilt board HD9.
Lamp fan on side opposite tilt
board. Connects to Tilt board
HD3.
Optics fan. Connects to Tilt board
HD4.
Motor power supply fan.
Connects to Pan board HD4
Lamp power supply fan.
Connects to Pan board HD3.
Temp sensor on tilt board side.
Connects to Tilt board HD5.
Temp sensor on side away from
Tilt board. Connects to Tilt board
HD10 .
Top box motor power supply fan.
Connects to HD10 on Pan board.
Problem/Procedure
For replacement parts, see "Contacting High End Systems®" on page ii
Fan is not operating:
1. Check wiring connections at fan and board.
2. Verify board operation by switching it with another 3-phase board
from the fixture, see "Replacing a Driver Board" on page 5-6.
3. Check for wire harness damaged or dead fan motor
Temperature sensor is not operating:
1. Check wiring connections at temp sensor and board .
2. Check for wire damage or dead fan.
Werbung
Inhaltsverzeichnis
