Static Color Position; Color Mix Function; Figure 4-4 Static Color Wheel Positions - High End Systems x.Spot Xtreme Handbuch

Table 4-5 Static Color Function Descriptions
Color Function
Allows positioning at any point on the color wheel (allows for a smaller "step"
Continuous
between color wheel positions for color crossfades).
Slow Scan Slowly oscillates the wheel at a factory-determined range and speed
Fast Scan Rapidly oscillates the wheel at a factory-determined range and speed
Random Selects random whole color positions at variable speeds.
Blink-indexed Closes then reopens the shutter between indexed color changes.

Static Color Position

DMX Channel 16 controls Static Color wheel position. Use this parameter to position
the beam at the center of a color wedge or halfway between two adjacent colors.
Figure 4-4 shows the available positions.
Position 5 Orange

Color Mix Function

This parameter determines how the cyan, magenta, and yellow color wheels move.
The Color Function values can be enabled in either full speed (controller crossfading
the wheel positions), or MSpeed (MSpeed control of the wheel motor). For more
information on MSpeed, see "MSpeed (Motor Speed)" on page 4-9.
Table 4-6 describes the Color Mix Function settings.
4-12 DMX Programming

Figure 4-4 Static Color Wheel positions

Position 6|1
Position 6 Blue
Position 5|6
Position 4|5
Description
Position 1
Open
Position 1|2
(White)
Position 3|4
Position 4 Green
Position 2 Red
Position 2|3
Position 3 Yellow
x.Spot Xtreme User Manual
®