Cyan, Magenta, And Yellow; Cto And Ctb; Table 4-7 Cyan, Magenta, And Yellow Setting Descriptions; Table 4-6 Color Mix Function Descriptions - High End Systems x.Spot Xtreme Handbuch

Table 4-6 Color Mix Function Descriptions

Color Function
Allows color wheel movement from open (white) to saturated color (permits a
Pure Mix
smaller "step" between color wheel positions for color crossfades).
Continuous Allows complete 360 degree color wheel movement.
Puts all three (cyan, magenta, and yellow) color wheels in spin mode. Wheel
Spin
Spin speed, direction, or fixed position can be set individually on CMY channels.
Uses only the color-mixing portion of the cyan, magenta, and yellow color wheels
Cycle to cycle colors from red to green to blue at variable speeds (rate set by cyan
DMX channel).
Performs a pseudo-random color chase of 12 factory-selected colors using the
Random cyan, magenta, and yellow color wheels at variable speeds (rate set by cyan
DMX channel).
Defined using Continuous wheel operation. Shutter snaps closed during any
Blink
color move, then re-opens.

Cyan, Magenta, and Yellow

These parameters determine how the individual color mixing wheels move. Channel
18 controls Cyan, Channel 19 controls Magenta and Channel 20 controls Yellow.
The Color Function value choosen determines the available color wheel settings, (see
Table 4-7).

Table 4-7 Cyan, Magenta, and Yellow Setting Descriptions

Color Function Setting
Available
Pure Mix Mode
Continuous Mode
Spin Mode
Cycle & Random Mode

CTO and CTB

Color Temperature Orange (CTO) and Color Temperature Blue (CTB) wheels allow a
full range of color temperature adjustment in x.SpotXtreme fixtures. Channel 21 and
22 control the CTO and the CTB wheels respectively. Each wheel can be set from Full
filtering to Open (no filtering). Full CTO adjusts temperature to a low value of
3,000K. Full CTB brings the color temperature to a high of 7,500K.
Both CTO and CTB contain a diffusion filter wedge used to adjust beam flatness.
Beam flattening equalizes the intensity across the beam to minimize "hotspots".
CTO and CTB are not affected by Color Mix function settings.
x.Spot Xtreme User Manual
®
Allows exact positioning of the color wheel from full color to white.
Allows exact positioning of the color wheel from white to full color to
white over the full revolution of the wheel.
Determines the color wheel spin speed, direction, or fixed position.
Determines the speed at which all three (cyan, magenta, and yellow)
color wheels move to the next cycle color or random color. The Cyan
color wheel sets the rate for all the wheels.
Description
Description
DMX Programming 4-13
4